Sharpening Tools
Showing 1–15 of 19 results
-
Read moreZandstra Joha Pro 7150The Joha sharpener has been especially designed for the demanding ice skater. The design in combination with the most modern techniques of high-pressure casting has resulted in a very accurate sharpening jig. In addition, the two moulded sides are unique in shape and strength. Thanks to the specially designed clamping profiles, the blades can be […]
-
Read moreZandstra Foss Sharpening Stone 7205 -
Read moreRadius Sharpening Machine IV“The perfect machine to sharpen your speed skates accurate” These days skaters (competition and recreational) prefer to have a specific radius in the blades. To meet this demand, the Radius Sharpening Machine has been developed. Reliable, accurate and relatively easy to operate. Over the years Zandstra Sport has installed many of these machines worldwide. During […]
-
Read moreFoss Honing oil 7313Foss honing oil applied to a porous sharpening stone gives the runner of the skate a smooth and sharp edge. In fact, oil should be applied to all sharpening stones before each use; otherwise dirt and dust can strain the pores. Using oil will increase the lifespan of the stone. The content of a bottle […]
-
Read moreFoss Sharpening stone cleaner 7316When your sharpening stone is clogged (the so-called glazing effect), it needs to be cleaned. The Foss sharpening stone cleaner is the perfect product for this. It opens the stone’s pores, and dust and bits of steel will disappear. Your sharpening stone is ready to do its job again. Mix the cleaner with water (1:40). […]
-
Read moreFoss Ensis 7319Foss Ensis is the perfect protection for your blades. Rust will be an issue of the past. The content of a bottle is 250 ml.
-
Read moreFoss Sharpening Grain 7425Sharpening with a worn-out stone may damage your valuable skates. With Foss sharpening grain you can make your stone flat and clean. The granules are made of CG60 silicon carbide. Place some granules on a thick glass plate and make circular movements with the worn-out stone. Your sharpening stone will be flat and clean in […]
-
Read moreZandstra 3M Polishing TriangleFor an optimal sharpening result there are 5 different grades of self-adhesive lapp film on a specially extruded aluminium triangle. The length of the triangle is 25 cm. The micro aluminium oxide gives the edge a very shiny surface. The aluminium triangle comes complete with 3 different polishing strips. The strips can be reordered separately. […]
-
Read moreFoss Duo Diamond Stone 7514This is a combination stone of two grits of diamond plates, one for sharpening and one for polishing. Some advantages are: – Quick and easy sharpening – The stone always stays flat – Less burr on the sides of the runners – Lasts longer – Suitable for all qualities of steel (carbon, stainless, bimetal, PM […]
-
Read moreFoss Pocket Diamond Stone 7800Pocket stones are used to remove the burr of the runner of the skate after sharpening or after skating. This is a combination pocket stone of two grits of diamond. The flat nickel plate makes it possible to be very accurate. The pocket stone has a coarse as well as a fine side to achieve […]
-
Read moreCombination Stone 7210Pocket stones are used to remove the burr of the runner of the skate after sharpening or after skating. This is an entry level combination stone made out of silicon carbide with a coarse side and a fine side. Size: 25 x 5 x 2.5 cm
-
Read moreNorton Oil-filled Polishing Stone 7215This is a combination stone made out of aluminium oxide abrasive filled with oil. Thanks to the oil in the stone the polishing result is very smooth, especially with high-end blades. The extra length (29 cm) gives a better grip during sharpening. Size: 290 x 60 x 25 mm.
-
Read morePocket Stone 7201Pocket stones are used to remove the burr of the runner of the skate after sharpening or after skating. Made out of silicon carbide, the pocket stone is ideal for removing the burr after sharpening. It comes packed in a practical case. Size: 75 x 20 x 5 mm.
-
Read morePocket Diamond Stone DMT 7400Pocket stones are used to remove the burr of the runner of the skate after sharpening or after skating. The stones are low weight and easy to take with you. Three diamond grits are available to achieve a burr-free edge. – Extra fine – green (9 micron) – Fine – red (25 micron) – Coarse […]
-
Read moreSharpening Jig “High” 7130The aluminium anodized sharpening jig is made out of one piece of special extruded profile. The stability of the sharpening table makes it very user-friendly. This extra high model has been developed especially for comfort skaters with a moulded boot, which also takes into account the width of the boot. This jig is 10 cm […]